Community TV Studio | MATV Design, RF Interference, Booster Overload (Free & Offline) | Shamoji DRIVE
MATV distribution level calculations, booster overload & intermodulation (IMD3) monitor, 2-antenna out-of-phase cancellation, and high-rise building shadow prediction.
Interactive Browser Workspace Specifications
- Category: engineering
- Capabilities & Tags: MATV Design / RF Interference / Booster Overload / IMD3 / Attenuator / Multipath / Ghost Killer / Coaxial Loss / CATV / JEITA Standards
- Execution Mode: 100% Client-Side In-Browser Execution (Zero External Data Transmission, Offline PWA Ready)
Included Workspace Modules
- 📐 Interactive Schematic Plotter & JEITA Standard (57-72 dBμV) Validator: Supports top-down (residential) and bottom-up (hotel/facility) trunk lines. Real-time signal level tracing from booster launch down to terminal outlets with instant color-coded JEITA compliance verdicts.
- ✨ Automated Tap-Off Value Optimization Across All Building Floors: Algorithmically tests standard tap-off values (-10, -13, -16 dB, etc.) to minimize voltage variance across floors, ensuring balanced signal delivery to every tenant.
- 💥 Booster Overload & 3rd-Order Intermodulation (IMD3) Spectrum Monitor: Simulates non-linear multi-carrier distortion and noise floor degradation caused by overdriving trunk amplifiers. Test attenuator (ATT) pads in real-time to restore digital C/N.
- 📡 2-Antenna Out-of-Phase Null Steering & Ghost Killer Synthesizer: Synthesizes dual-antenna array polar radiation patterns. Adjust phase angle and amplitude to aim a deep spatial null (-40dB) at interfering signals or multipath reflections.
- 🏢 Building Shadow & Specular Wall Reflection Geometric Prediction: Calculates digital TV shadow boundaries and reflection hazard areas based on building dimensions, transmitter azimuth, and elevation angles with interactive canvas mapping.
- 📋 MATV Engineering Standards & JEITA Cheat Sheet (Loss & C/N Tables): Standard attenuation tables for 3C, 5C, 7C, and 10C coaxial cables up to 3224 MHz (4K/8K), coupler specs, and required minimum C/N (MER) / BER thresholds.
Read Full User Guide, Use Cases & FAQ → | All 33 DevTools Catalog